|
Rugged traction surface and pedestrian friendly surface:
DD2 is suitable for applications where pedestrians can be found yet where a rugged tread design is or may at one point be desired. Each DD2 consists of a pedestrian friendly, non-slip tread design on one side and our standard rugged traction design on the other. Sections are reversible and can be used with either side face up. When facing up, the pedestrian friendly surface still offers traction for vehicles and equipment, while the rugged down-facing side provides additional mat tract ion to the ground, preventing mat slippage or “spin out”.
Use DD2 for parking areas, construction site walkways, concerts, and other uses where people are expected to walk on the DuraDeck regularly.
The DD2 pedestrian friendly surface is also perfect for protection
of concrete, asphalt, stone or aggregate surfaces, where
the rugged pattern may be too aggressive and could potentially
cause damage. The pedestrian friendly design may be
placed face down on such surfaces to provide protection.
Standard DD2 mats are 4ft x 8ft long (other sizes available).
Sections are ½” thick at the core, not including tread
pattern height. DD2 contains 4 connection holes, one
at each corner, and 4 additional connection holes (2
each at the center of the 8ft side). These allow panels
to be connected in either direction and to be rotated
at 90 degree angles as required.
Custom sizes, colors and logos are available with minimum quantities. Contact us at sales@duradeckmats.com. See some examples of our custom work.
Use our DuraLink or PlastiLink connectors with DD2
panels to create contiguous and connected runs of material
for roadways or work pads. You can store DD2 on your
own pallets or on our specialized metal pallets.
|
){kind=link}